Fiber Optic Passive
Fiber Optic Bulk Cable
Fiber Optic Jumpers
Fiber Optic Pigtails
Fiber Optic Connectors
Fiber Optic Adapters
Fiber Optic Attenuators
Loopback Assembly
Fiber Optic Splitter
MPO/MTP Series
Fiber Optic Active
Media Converter
Optical Transceiver
CWDM,DWDM,OADM
Structured Cabling Products
Lan Cable
Patch Cables
Patch Panel
Keystone Jack
110 Wiring Block
Cable Management
Face Plate and Surface Mount Box
MINI SAS8088
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

10/100/1000M Fiber Media Converter
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Description

Overview
This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).

2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: <60
6. Relative humidity: 5%-90%
7. TP cable: Cat5 UTP cable
8. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

 

Ordering information:  

 


Description

Fiber mode

Connector

Wavelength

Distance

TX power(dbm)

RX power(dhm)

OP-8110GMA-11-05-AS

Multi-mode dual fiber

SC

850nm

550m

-17~-12

<<-20.0

OP-8110GMA-11-2-AS

Multi-mode dual fiber

SC

1310nm

2 Km

-17~-12

<<-20.0

OP-8110GSA-11-10-AS

Single-mode dual fiber

SC

1310nm

10 Km

-6~-12

<<-21.0

OP-8110GSA-11-20-AS

Single-mode dual fiber

SC

1310nm

20 Km

-3~-8

<<-23.0

OP-8110GSA-11-40-AS

Single-mode dual fiber

SC

1550nm

40 Km

-3~-0

<<-25.0

OP-8110GSA-11-60-AS

Single-mode dual fiber

SC

1550nm

60 Km

OP-8110GSA-11-80-AS

Single-mode dual fiber

SC

1550nm

80 Km

>>1

<<-27.0

OP-8110GSB-11-10A/B-AS

Single-mode single fiber

SC

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

10 Km

-10~-5

<<-20.0

OP-8110GSB-11-20A/B-AS

Single-mode single fiber

SC

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

20 Km

-8~-5

<<-23.0

OP-8110GSB-11-40A/B-AS

Single-mode single fiber

SC

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

40 Km

-3~0

<<-23.0

OP-8110GSB-11-60A/B-AS

Single-mode single fiber

SC

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

60 Km

-3~0

<<-23.0